Single nanowire assembled by liquid dielectrophoresis for on-chip technologies

ABSTRACT

Study on dynamic tensile properties and atomic chain fabrication of single nanowire, for understanding its dynamic tensile properties and unique physical properties of atomic chain to fabricate atom scale devices, is one of frontier research issues in nano-scale science. However, how to assemble single nanowire on a tensible micro-structure becomes one of the most difficult problems, which severely restricts the development of this research field. In this paper, after the ultrahigh tensible microelectrode chip is fabricated by micro-electromechanical systems technology, hexamethyldisilazane is utilized to improve hydrophobicity of the chip, and then a micro-droplet dielectrophoresis experimental platform and technology is developed to assemble single nanowire on the sensible microelectrode. Experimental results show that accurate and efficient assembly of single Cu nanowire is realized, which contributes greatly to the further research of dynamic tensile properties and atomic chain fabrication. And for guiding the assembly experiments, finite element technology is also utilized to analyze the local micro electro-field around the microelctrodes during dieletrophoresis experiments.     

热处理对挤压态Mg-6Gd-5Y-1Zn合金组织与性能的影响

通过对Mg-6Gd-5Y-1Zn(质量分数,%)合金在固溶和时效处理状态下显微组织和力学性能的研究发现,α-Mg基体、沿挤压方向分布的条状18R-LPSO相、少量的Mg₂₄(GdYZn)₅ 相以及细层片状的14H-LPSO相构成了挤压态合金的组成相。挤压态合金经固溶(T4)处理后,一部分18R-LPSO相溶入基体,并且基体中的14H-LPSO相伸长同时粗化。挤压态合金经过固溶加时效(T6)处理后,大量β′相从α-Mg基体中析出。T6态合金的室温力学性能最好,其屈服强度、抗拉强度及伸长率分别为272 MPa、406 MPa和6.1%。β′相沉淀也发生在挤压态合金的直接人工时效(T5)处理过程,但相比于T6处理,14H-LPSO相和β′相在基体中的体积分数均偏低。     

Catalytic combustion of methane over a highly active and stable NiO/CeO2 catalyst

In the last decades, many reports dealing with technology for the catalytic combustion of methane (CH₄) have been published. Recently, attention has increasingly focused on the synthesis and catalytic activity of nickel oxides. In this paper, a NiO/CeO₂ catalyst with high catalytic performance in methane combustion was synthesized via a facile impregnation method, and its catalytic activity, stability, and water-resistance during CH₄ combustion were investigated. X-ray diffraction, low-temperature N₂ adsorption, thermogravimetric analysis, Fourier transform infrared spectroscopy, hydrogen temperature programmed reduction, methane temperature programmed surface reaction, Raman spectroscopy, electron paramagnetic resonance, and transmission electron microscope characterization of the catalyst were conducted to determine the origin of its high catalytic activity and stability in detail. The incorporation of NiO was found to enhance the concentration of oxygen vacancies, as well as the activity and amount of surface oxygen. As a result, the mobility of bulk oxygen in CeO₂ was increased. The presence of CeO₂ prevented the aggregation of NiO, enhanced reduction by NiO, and provided more oxygen species for the combustion of CH₄. The results of a kinetics study indicated that the reaction order was about 1.07 for CH₄ and about 0.10 for O₂ over the NiO/CeO₂ catalyst.     

On cutting temperatures in high and ultrahigh-speed machining

Since Dr. Carl Salomon proposed the well-known hypothesis on cutting temperatures in 1931, the debate on the hypothesis has never stopped. It shows that ev     

Optimal carbon reduction level and ordering quantity under financial constraints

Carbon tax policy is widely adopted by many countries to curb carbon emissions. In the context of carbon tax policy, firms have more incentive to improve carbon reduction levels by reducing their carbon tax costs. However, firms need to bear carbon reduction costs that may cause shortage of capital. Thus, firms may face problems of financial constraints, which may demotivate firms to produce greener products. To address the decision‐making challenges of firms in the contexts of carbon tax policy and financial constraints, we consider a supply chain with a manufacturer who produces green products and a retailer who sells these products. Our study develops five models to investigate the two firms’ optimal wholesale price, carbon reduction level and ordering quantity, according to the manufacturer and retailer with or without financial constraints. Our goal in this study is to explore how carbon tax policy and banks’ interest rates affect the profits of the two firms, supply chain and consumer surplus. Certain managerial insights are obtained as follows. We demonstrate that carbon tax policy and banks’ interest rates demotivate the manufacturer to produce greener products and demotivate the retailer to order more products. If the interest rate to the manufacturer (retailer) is relatively low, then the manufacturer with financial constraint benefits (harms) the consumers compared with the retailer with financial constraint. Importantly, our analysis suggests that carbon tax policy harms the firms but benefits consumers, and the government in some conditions should reduce unit carbon tax.     

Ultra-stable K metal anode enabled by oxygen-rich carbon cloth

The K metal batteries are emerged as promising alternatives beyond commercialized Li-ion batteries. However, suppressing uncontrolled dendrite is crucial to the accomplishment of K metal batteries. Herein, an oxygen-rich treated carbon cloth (TCC) has been designed as the K plating host to guide K homogeneous nucleation and suppress the dendrite growth. Both density function theory calculations and experimental results demonstrate that abundant oxygen functional groups as K-philic sites on TCC can guide K nucleation and deposition homogeneously. As a result, the TCC electrode exhibits an ultra-long-life over 800 cycles at high current density of 3.0 mA·cm⁻² for 3.0 mA·h·cm⁻². Furthermore, the symmetrical cells can run stably for 2,000 h with low over-potential less than 20 mV at 1.0 mA·cm⁻² for 1.0 mA·h·cm⁻². Even at a higher current of 5.0 mA·cm⁻², the TCC electrode can still stably cycle for 1,400 h.

     

改善硫精矿浓密机溢流跑浑试验研究

本文旨在改善某选厂硫精矿浓密机溢流跑浑问题,对生产现场进行勘察和分析,分析浓密机溢流跑浑的原因,并开展原矿配比和沉降试验研究。对采场原矿矿样和硫精矿矿浆进行系统的试验研究,分别采用不同沉降方案进行条件试验,考察絮凝剂种类、絮凝剂用量、pH调整剂用量、不同药剂之间的配比等条件对沉降的影响,确定合适的原矿配比及合理药剂制度,有效地控制金属在溢流中的损失,充分获取现有产品的蕴含价值。